Sika Pyroplast Wood T is a transparent intumescent aqueous coating , a Clear fire protection coating which forms a carbon char when subjected to heat. this is a 2 pack system.
This Pack Contains Sufficient Top coat to cover 25 Square metres.
You will also need : Pyroplast T Base coat link to page
Sika Pyroplast Wood T provides spread-of-flame protection reducing the spread of fire to wood and wood derivatives.
Sika Pyroplast Wood T provides optimal clarity. An intumescant clear varnish which does not suffer from the milky finish of similar products.
Reduction of ignitability of soft and hardwood ≥ 10 mm thickness and other timber derivatives, i. e. plywood, chipboard, fibre insulation board, hardboard and also on veneers ≥ 12 mm thickness. Insulates against heat, checks fire, prevents propagation of fire and spread of flame and diminishes flue-gas temperatures.
Sika Pyroplast T should not be used in areas of high humidity, heat sources or on surfaces where significant physical impact is likely such as floors, stairs etc.
- Water based coating system
- VOC: approx. 40 g/l
- Free of aromatic solvents
- Low material consumption
- Simple application
- No additional statical load of coating
Approval / Standards:
Sika Pyroplast Wood T is thoroughly tested to ensure that the coating performs in all conditions and has been successfully tested and classified to many standards worldwide including EN 13501-1 and BS 476 part 6/7.
See technical Tab for further information and Download Data