Flametect C-WD. The Class Leader in Performance !
A Clear Flame Retardant Treatment for Wood & Timber Products. 
The only product of its type Fully Tested in the UK by Exova (Warrington Fire) to
BS476 Class 0 &1 BS476 Class 0&1 Explained
Euroclass B EN13501-1 2007+A1. Class B.  
(Tested in the USA ASTM E-84/UL723/ NFPA255)
Manufactured and Developed in the UK.
A Warrington Exova Certifire Registered Product 

​​​​​​​Flametect CWD is a Clear, Colourless and Odourless Impregnation, it will not discolour, wood or other wood derived materials. It does not leave a visible sheen and dries to a natural finish.

Flametect CWD. Contains environmentally friendly components that assists the active flame retardant components to deeply penetrate the wood.

Unlike our competitors products we have full test reports to  BS476 Class 0, Class 1 & Euroclass B. BS476 Class 0 is not interchangeable with the Euro Classifications

Flametect CWD. "locks in" the flame retardant components using special couplers that protect the flame retardant from harsh environments leaving a weather resistant colourless product once applied & dry.   

• Flametect C-WD. may be applied to wood by spray , brush or roller
• Unlike textiles it is important that the desired volume is applied to the wood
• Please ensure wood is dry before application, where it is possible to measure the moisture content, the moisture content should ideally be 20% or lower
• The desired absorption rate for most woods & MDF is 4 square metres per litre
• The absorption rate by other timber based products ( plywood, strand board etc. )  is less as adhesives & bonding agents prevent total absorption
• Where multiple coats are required please allow approximately 1 hour between coats
• When applied externally please either protect from the elements or where possible opt for a dry 24 -48 hour application / drying period

PLEASE TELEPHONE 0845 293 7770 or E. MAIL sales@eco-sol.co.uk FOR FULL DETAILS & SCOPE OF CERTIFIRE CERTIFICATION.

Typical Applications